PreSonus SCEPTRE S6 6.5" CoAxial Active Studio Monitor
Price is for one (each)
- CoActual technology combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
- Unique coaxial transducer integrates 6.5-inch midrange driver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
- 32-bit, 96 kHz, dual-core, active floating-point DSP provides critical Temporal Equalization™ with multiple FIR filters
The Sceptre series includes two models. The Sceptre S8 CoActual Studio Monitor combines an 8-inch low/mid-frequency driver and a 1-inch (25 mm), horn-loaded, high-frequency transducer into a single coaxial unit with aligned voice coils. The Sceptre S6 uses the same technology and design as the S8 but with a 6.5-inch low/mid-frequency driver. Both models have front-firing acoustic ports. The systems are biamplified: Each transducer is powered by a 100W RMS, Class D power amp with an internal heat sink. Each Sceptre has its own internal power supply with IEC connector and a power switch with on/off LED. All Sceptre-series monitors have a balanced XLR and ¼-inch TRS line-level inputs with A-taper level control. To this package of custom transducers, powerful DSP running custom software, and first-rate power amplification, add a rich set of acoustic adjustments and full speaker protection, and you have a new, affordable close-field monitoring standard for project studios and commercial facilities. As you expect from PreSonus, Sceptre studio monitors use top-quality components and construction quality fit for royalty-and they look regal, too! Coaxial done right with TQ™ Each Sceptre monitor contains a 32-bit, 96 kHz, dual-core, active floating-point DSP chip that enables the use of Fulcrum Acoustic’s TQ algorithms. The processor is used to manage horn reflection, linear time and amplitude anomalies correction, performance contouring, and dynamic and excursion limiting. The result is coaxial speakers that perform far better than all but the most expensive studio monitors. You wield the Sceptre In addition to making possible the Sceptre’s coaxial design, the monitor’s onboard DSP provides user-adjustable contour features for optimizing the monitors for your mixing space. This enables full integration into any studio environment. A four-position Acoustic Space switch controls a second-order shelving filter centered at 100 Hz, with four attenuation settings (no attenuation, -1.5 dB, -3 dB, and -6 dB) so that you can account for the boundary bass boost that occurs when the monitor is placed near a wall or corner. If you don’t want to roll of those lows, set it to 0 dB. Safety Matters Any loudspeaker is subject to an assortment of environmental and performance problems, and Sceptre monitors offer protection from most common of these. RF shielding protects against radio frequencies that could be induced into the signal and become audible. (If you’ve ever heard a radio broadcast unexpectedly coming out of a guitar amp, that’s the result of RF interference.) Sceptre monitors also provide over-temperature protection to avoid heat-related issues and current-output limiting to prevent damage should there be a short circuit on the speaker terminals. Finally, the power amplifiers have a “soft startup” so that you don’t get damaging pops in the speakers when you power them up. Sound fit for a monarch Monarchs of old wielded their scepters as a sign of authority over their realm; with PreSonus Sceptre studio monitors, you can assert sonic control over your realm. Thanks to coaxial design done right, you can hear your tracks and mixes better than ever before. And you don’t have to pay a king’s ransom to wield them!